With the improvement of people's requirements for the quality of life, rattan chairs are gradually popularized from developed countries in Europe and America to the world. The processing of rattan is complicated and the production cycle is relatively long. Minghao Mould keeps up with the technological trend of the times and can manufacture high-quality rattan chair mould for customers. In order to make a good rattan chair mould, we start with the following aspects:
1. Meet product demoulding requirements. Therefore, the position of the parting surface should be selected at the part with the largest cross-sectional size of the product.
2. When determining the orientation of the product in the rattan chairmould, the selection of the parting surface should try to prevent the product from forming side holes or side buckles, and avoid using complex mould structures. ,
3. To ensure the appearance and quality of the product. In order to ensure the beauty of the rattan chairs, we do our best to reduce the parting line. Generally speaking, the appearance surface is not allowed to have lines that affect the appearance
4. Facilitate demoulding. Generally, the demoulding mechanism of the mould is in the movable mould, so when selecting the parting surface, the product should be kept in the movable mould as much as possible after the mould is opened.
Please make sure your E-mail address is correct otherwise the recipient will not be able to reply.